Thermo Scientific MaxQ 7000 Water Bath Orbital Shaker, Digital, 120V

Combine a controlled water bath temperature and orbital shaking motion with the Thermo Scientific MaxQ 7000 Water Bath Orbital Shaker. These benchtop orbital water bath shakers easily hold large gel trays in an oversized bath chamber and contain an easy-access drain system located in the front of the cabinet. They are ideal for cell culture, solubility studies, extraction procedures, diagnostic tests and many other applications. Features : The MaxQ 7000 is easy to drain and disinfect with the front-access drain system and quick disconnectTwin baffles minimize splashing and turbulence in the chamberChoice of stainless-steel or Plexiglas cover minimizes evaporation and heat lossTemperature range of 5 C above ambient to 90 C with use of stainless-steel coversMonitor and control chamber temperature range with 0.2 C accuracy at 37 C in flaskView speed, time and temperature simultaneously on three separate displaysTriple eccentric drive handles heavy loads, uniform agitation and continuous 24-hr. operation, even at high speedsEasy access drain system with quick disconnect is located in the front of the cabinet for convenience in draining and disinfecting the systemLow-level water alarm alerts operatorOptional cooling coil extends the range of applications to near and below ambientHolds 11 13" platform which must be ordered separately Digital Model : Speed range: 15 to 500rpm, 1rpm Continuous and timed operation from 0.1 hr. up to 999 hr. or 0.1 min. to 999 min. Shaker shutdown and audible/visual alarms signal if unit operates 10% of set speed, preventing shaker from walking Visual/audible signals alert to temperature deviations and low water levels; heat turns off if temperature deviates 1 C of setpoint User-adjustable speed calibration can be performed using a digital handheld tachometerUnbalanced load sensor stops platform motion when excess vibration is detected; visual/audible alarms signal until condition is correctedSoft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closureSolid-state DC brushless motor is maintenance-free Retains parameters during power failure and restarts automatically after power is restored Required Accessories: Universal Platform (without clamps), or Dedicated Platform (with pre-installed clamps) Clamps Note: For a complete system, order platforms and clamps (sold separately). Note: WILL NOT SHIP TO RESIDENTIAL ADDRESSES.