Powerblanket Insulated Tote Heating Blanket For Gallon Drums, Up To 110 F, 120V

BH55-CID2T4-38C: This Powerblanket barrel heater model is specifically designed and ETL certified for Class 1 Division 2, Groups A, B, C, and D hazardous locations with a temperature code T4 maximum. The 55-gallon barrel and drum heater from Powerblanket offers a state-of-the-art heating system that is far superior to band heaters, which localize the heat to only one spot. The Powerblanket drum heater encases the entire drum in a heating blanket, insulating the entire drum and distributing the heat across the entire surface. The BH55-CID2T4-38C drum heater only requires 800 watts to power it. It is water-resistant and can be used on poly and steel drums. This drum heater comes standard with an internally fixed thermostat set to maintain an approximate temperature of 100F / 38C, with no concern for over or under heating your drum contents. We're proud to say that our BH55-CID2T4-38C model is ETL certified to UL & CSA safety standards, giving you peace of mind knowing you've ordered the safest and most efficient Class 1 Division 2 safety certified 55-gallon drum heater on the market! ETL Standards: CSA C22.2 No.130 - Issued:2003/04/01 Ed:3 (R2008) Requirements for Electrical Resistance Heating Cables and Heating Device Sets- Supersedes C22.2 NO 130.1-M90, C22.2 NO 130.2-93, and C22.2 NO 138-M89; Update No. 1 CSA C22.2 No.213 - Issue:1987/03/01 Ed:1 Non-Incendiary Electrical Equipment for Use in Class I, Division 2 Hazardous Locations; General Instruction No 1: 1987/03/01 - (R2008) ANSI/ISA-12.12.01-2012 - Issue:2012/07/09 Non-incendiary Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Location ANSI/UL 499-2012 - Issue:2005/11/17 Ed:13 Rev:2012/04/11 UL Standard for Safety Electric Heating Appliances Powerblanket BH55-CID2T4-38C 55-Gallon Drum Heating Blanket (Class 1 Division 2 Hazardous Location Safety Certified) Features: Three individual heat zonesIncludes buckles & straps to secure a tight fitHeats when and where it's neededHassle-free internally fixed thermostatMaintains an approximate temperature of 100F / 38CAutomatically adjusts to varying fluid levelsDelivers safe, distributed heat to temperature-sensitive materialsPreserve expensive materials without overheating or burningInsulated full-wrap design making it ultra energy-efficientSafe for outdoor useWater-resistantWorks on both poly and steel drumsPrevent product waste by safely maintaining consistent temperaturesTargeted and distributed heat eliminates hot and cold spotsETL certified to UL / CSA / CE safety standardsMade in the USA.