JET JTM-1050EVS2/230 Mill - Acu-Rite 200S DRO - X, Y and Z-Axis Powerfeeds - Air Powered Drawbar

Constructed using the Meehanite casting process, the JTM-1050EVS2/230, 10" x 50" Electronic Variable Speed Milling Machine provides consistent and reliable operation. The newly designed column and base incorporates a rigid, robust design that is easily leveled without lifting the machine. JET Mills have features you've come to expect and are backed by the industry-leading JET Two Year Warranty Features: JET designed Certified Meehanite casting with enhanced ribbing ensures rigidity and tolerance retentionSwing away control box houses an e-stop and puts all controls at the operators fingertipsThe innovative design of the machine base provides an easier solution to level the machine without raising it up off the floorAutomatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervalsFor added safety, the heavy-duty spindle break stops the spindle and interrupts the power, preventing accidental start-upsThe electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessoriesCSA/CUS CertifiedClass 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applicationsSpindle head is internally cooled extending bearing, belt and motor lifeTable and ways are hardened up to 54 HRC and precision ground for greater accuracyThe X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movementsSwing away safety shieldLED work lampChip panDual locks on all moveable surfacesWay coversDrawbarTool box with toolsSpecifications: Digital Readout: Acu-Rite 200SNumber Of Axis: 2Powerfeed: X, Y And Z-AxisPower Draw Bar: PneumaticSpindle Taper (In. x TPI): R-8Table Size (L x W) (In.): 10 x 50Quill Diameter (In.): 3-3/8Number Of Spindle Speeds: VariableRange Of Spindle Speeds (RPM): 60 - 4,500Quill Down Feed Rates (IPR): .0015 - .003 - .006Spindle Travel (In.): 5Head Movement: 90 R & L 45 F & B Max Distance Spindle To Table (In.): 20-3/4Distance Spindle To Column (Max.) (In.): 26-3/4Distance Spindle To Column (Min.) (In.): 4-3/4Collet Capacity: 1/8 - 7/8Table Longitudinal Travel (In.): 35-1/3Table Longitudinal Travel With Powerfeed (In.): 29-7/8Table Cross Travel (In.): 14-3/4T-Slots Number And Size (In.): 3 And 5/8T-Slot Centers (In.): 2-1/2Work Table Weight Capacity (Lbs.): 840Travel Of Knee (In.): 16-1/8Travel Of Ram (In.): 15-7/8Saddle Width (In.): 11-1/2Column Width (In.): 20Inverter Type: Delta, BMotor: 3 HP, 230V, 3PhOverall Dimensions (L x W x H) (In.): 66 x 63 x 87Weight (Lbs.): 2,860JET Red Assurance 2-Year Warranty: JET warrants every product it sells. If a JET tool needs service or repair, One of JET's Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools.