Copied Ergodyne Squids 3194 Hand Tool Tethering Kit
Ergodyne Squids 3194 Hand Tool Tethering Kit
The Squids 3194 Hand Tool Tethering Kit includes a 3156 Coil Tool Lanyard with Single Carabiner and the 3740 Hand Tool Attachment Trap Slips Variety 4-Pack. This tool tethering kit allows you to tether four different sized screwdrivers and hex key wrenches making it easy to use your tools on the job while preventing dropped objects when working at-heights. The 3156 Coil Tool Lanyard is more than just a small tool and hard hat lanyard. Built and tested to endure tough conditions and rated to support weight up to 2lbs / 0.9kg, the coiled lanyard is made with a low-profile design and durable plastic. With the lightweight aluminum carabiner on one end and a tethering loop on the other, it easily connects to tool anchors and attachments, even while wearing gloves. The coiled tether design reduces lanyard length to prevent snag and tangle hazards. The coil stretches from a compact 12in to 48in / 30cm to 122 cm. STRAIGHTFORWARD INSTALLATION No additional install tools or complicated taping or shrinking! The patented Slips design requires a simple installation that follows its name. Simply "slip" the tool attachment on to the tool and connect the Squids 3156 Coil Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool. Simply poke the end of the hand tool through the orange interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment's interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. To remove the Slips , simply push on the tab to loosen and then slide it off the shaft of the tool. No adhesive residue or mess will be left behind! PERFECT FOR SMALL HAND TOOLS Small hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids Hand Tool Slips allow you to tether tools up to 1lb. based on their diameter. Four sizes of Slips are compatible on tools with diameters ranging from 0.05" (1.3mm) to " (12.5mm). Check out the size chart for specific ranges per size.
Price Comparison
| Seller | Contact Seller | List Price | On Sale | Shipping | Best Promo | Final Price | Volume Discount | Financing | Availability | Seller's Page |
|---|---|---|---|---|---|---|---|---|---|---|
|
BEST PRICE 1 Product Purchase
|
|
$29.95 | $29.95 |
Flat Shipping ($29.99)
|
$29.95 | See Site | In stock | Visit Store |
Reviews
Questions & Answers
Elkay Plastics ReadyFresh Compostable Wrap Pack with Window 4-1/4" x 2-1/2" x 5-1/4", 500/Case
$169.95
Lubeworks Oil Transfer Pump Air Operated Pneumatic, PRO Heavy Duty Double Action
$379.95
Allpoints 262285 Lower Bearing For Hobart
$10.50
IKO Inner Ring for Shell Type Needle Roller Bearing METRIC, 30mm Bore, 35mm OD, 30.5mm Width
$63.75
METCHEM 6470 Synthetic Fluid - Gallon Pail
$159.95
Chadko PVC Shelf Liner, 36"W x 24"D, White - Package Quantity of 2
$60.95
Global Industrial Pallet Rack Safety Clip
$0.97
Forney 190 MP 4-in-1 Multi-Process Welder Machine, V
$1,325.00
Durham Steel Scoop Compartment Box - 16 Compartments 18 x 12 x 3 - Pkg Qty 4
$147.80
CM Hurricane 360 Hand Chain Hoist, 1/2 Ton, 30 Ft. Lift
$839.00
NEMA Enclosed Motor Starter, 80A, 3PH, Direct Online, Reset Button, 250-500V, 65-78A
$719.00
Aignep USA Swivel Male Elbow Release Collet 5mm Tube x M5 BSPP - Pkg Qty 10
$53.00
Reflective Marking Tape, Yellow, 2"W x 150'L Roll
$155.90
Master Magnetics Powerful Handle Magnet 50 Lb. Pull, Red - Min Qty 8
$98.00
Volcom Evolve Skate Inspired Work Shoes, Composite Toe, Size 7.5M, Triple Black
$109.95
King Unit Heater , 5KW, 240V, 1 Phase, WThermostat & Bracket, Stainless Steel
$4,149.00
Johnson Level Magnetic Digital Angle Locator 2 Button
$55.95
Shepherd Grip Neck Stem Soft Tread Caster - 50mm Dia. 5/16 x 1-1/2 Stem Black
$7.50
Modine Steam or Hot Water Unit Heater , 33000 BTU
$1,299.00
Made in USA C-6 Grade Carbide Tipped Square Shoulder Turning Tool Bit AR-8 Style
$9.80
Eco Gate , Expandable Portable Gate Extension, 6'W & In Use 6'6" Collapsed Height
$599.00
Global Industrial 72x36 Production Workbench ESD Safety Edge - Drawer, Upright & Shelf BL
$969.00
Global Industrial 72 x 36 Adjustable Height Workbench - Power Apron, Maple Square Edge Blue
$985.00
Benchmark Scientific Microplate Removing Aid
$539.00
Scotch 897 Filament Tape 3/4" x 60 Yds. 5 Mil Clear - Pkg Qty 48
$369.60
R&B Wire Products Three Panel Mobile Medical Privacy Screen, 81"W x 69"H, Pink Vinyl Panels
$185.95
Summit Freestanding All Refrigerator W/Lock 5.5 Cu. Ft. White
$985.00
Fasade Traditional Syle # 1 - 48-3/8" x 24-3/8" PVC Glue Up Tile in Brushed Aluminum
$199.95
FallTech FT-One Fit Non-Belted Full Body Harness, Standard, 3 D-Ring, Quick-Connect Legs, X
$415.20
Metric One-Piece Clamping Collar, 15 mm Bore
$4.22
Global Industrial Axle Bracket Kit With One 1/2"Diameter 36"Long Axle
$14.50
Master Lock Straight Lever, Privacy, Satin Nickel
$62.95
Premium Latex Coated String Gloves, Memphis Glove 9680xl, 1 Pair - Pkg Qty 12
$50.28
AIMS Power Remote Battery Monitor For Lithium & Most Battery Types Up to 80V, 500 Amp
$165.95
Cambro - Table Top Model Food Bar 33x63, Hot Red
$1,299.00
Global Industrial Plastic Hang & Stack Bin, 10-7/8"L x 4-1/8"W x 4"H, Blue - Pkg Qty 12
$33.84
Global Industrial Pleated Air Filter, 20 X 30 X 1", MERV 8, Standard Capacity, Self-Supported - Pkg Qty 12
$112.80
Steel Cabinets USA All-Welded Bookcase, 36"Wx13"Dx84"H, Blue
$669.00
Vollrath ServeWell Sl Hot Food Table, , 5-Well, 29.2 Amp
$3,099.00
