Morse 310 Series TEFC Tilt-To-Load Drum Tumblers/Drum Mixer, 1PH, 230V, lb. Weight Cap

Morse Tilt-To-Load Drum Rotator tumbles a drum "corner-over-corner" for vigorous mixing of drum contents. Tilt-To-Load Drum Tumbler / Drum Mixer turns drum "corner-over-corner" in one direction. Load Upright Drum at Floor Level.. Has single-phase 60Hz motor. Motor Controls sold separately. OSHA requires enclosure with interlock. Mixing in a Closed Drum Means Less Hazards Using a Morse Drum Rotator eliminates spills, splashing of dangerous contents on workers, and risk of contamination. Now you can get the benefits of mixing inside closed shipping drums and have the machine do the work of loading and unloading itself! Morse 310 Series models accept the drum upright at floor level. The user controls hydraulic tilting action that raises the drum into position for rotating. A second valve allows the operator to start and stop the hydraulic motor that drives rotation. You minimize time, labor and operating cost by eliminating extra moves required for getting drum into mixing position. Rotate various sized drums, weighing up to Lb. (363 kg) at 5 to 20 RPM. Install all Morse Rotators in accordance with OSHA requirements for enclosure and safety interlock, etc. so the rotator automatically turns off when enclosure door is opened. One way to accomplish this is with a Morse enclosure with safety interlock. OSHA compliance, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place." Power connections and motor controls must comply with applicable codes. Features: Power-Tilt to Enable Easy, Floor-Level LoadingRotate closed plastic, steel, or fiber drumThorough corner-over-corner mixing actionSave time, labor and moneyUse a separate drum for each batchNo container to purge between batchesTumble a plastic, steel or fiber drum: 29" to 37" (74 to 94 cm) tall & 18" to 23.5" (46 to 60 cm) in diameterRotate your drum at: 5 to 20 RPM for 60Hz or Air modelsCapacity: Lb. (363 kg) Full DrumModel 310-1 is for single-phase 115/208/230V 60Hz power supplyAdjust drum rotation from 5 to 20 RPMRequired Electric Control Box to Start / Stop RotatorElectric Control Package sold separately: Model CP-310-1-115 for single-phase 115V 60Hz power supply, Model CP-310-1-230 for single-phase 208V or 230V 60Hz power supplyGuard Enclosure with Interlock sold separately as Kit GEK-310-1All 310 Series Tilt-To-Load Drum Tumblers...IMPORTANT: OSHA, CSA and EU require Enclosure with Safety InterlockMix inside closed drum to reduce hazards and worker exposureIncorporate sediment and homogenize valuable ingredientsAvoid messy cleanup of insertion mixersDrum holder tilts down to floor level. Easy to load upright drum...with drum truck, with below-hook drum lifter and your hoistTypical 30 to 55 gallon (114 to 210 liter) size drum.