AIMS Power Modified Sine Power Inverter, 10000 Watt, 12VDC to 120VAC, 833.3 Amp

This new 10000-watt 12-volt inverter model has all the capabilities of AIMS Power 's 8000-watt 12-volt inverter but offers a higher wattage capacity for bigger power demands. Our 10000-Watt 12VDC to 120VAC Modified Sine Power Inverter can run multiple appliances at once. It also offers a reliable, powerful solution for operating a piece of equipment that demands a high-wattage capacity, such as an air conditioner or air compressor. These machines use what's called "locked rotor startup" or "locked rotor amperage." LRA generates a surge that only a very powerful inverter can handle. This AIMS Power DC to AC inverter can get the job done because it can handle 20000 watts of surge for 40 milliseconds. This inverter is perfect for off-grid home backup power or at job sites where higher power demands are common. AIMS Power is always rethinking how inverters can improve so we can provide our customers the best technology available in the industry. The biggest innovation in this inverter is its weight. At a mere 21 pounds, it is unmatched by any other inverter on the market with such a high wattage capacity. Users will really appreciate the reduced weight and size if they use this inverter with a Vision battery bank from AIMS Power . Battery banks can become quite heavy, depending on how many are needed for the application. In addition to its light weight, this inverter has a compact design that makes it more convenient to install and applicable to practically any situation. Features: Continuous output power: 10000 WattsSurge power capability (peak power): 20000 Wattsdc input / operating voltage: 10 to 16 VoltsOutput voltage: 120 Volts ac +/- 10 Output wave form: modified sine wave with phase correctionOutput frequency: 60 Hz +/- 1 HzBattery low voltage alarm: 10.5 +/- 0.5 VoltsBattery low voltage shutdown: 10.0 +/- 0.5 VoltsNo load current: < 1.8 DC ampsFull load efficiency: 90 1/3 load efficiency: 95 No load minimum operating temperature: 30FFull load maximum operating temperature: 140F (automatic shutdown)AC Output Socket Type: quadruple Type 2 -3 prongHigh input voltage protection: 15V-17VLow input voltage shutdown: 10VProduct size (L x W x H): 21 3/8 x 7 7/8 x 6 inchesWeight: unit 23.1 lbs. boxed 25 lbs.UL maximum recommended per outlet 1500WThis inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts.10000W max continuous powerModified sine wave with Pulse Width Modulation technology (soft start)Volt meter on front panel to monitor your battery voltageAmp meter on front panel to monitor your current use (rate at which battery is drained)Over Temperature LED indicatorOver Load LED indicatorAC direct connect terminal blockOn/off switchOver Temperature protectionOver Load protectionSingle cooling fan thermally controlledInternally fuse protectedAC output short circuit protectionAuto reset on most fault conditionsAluminum case for optimal coolingPre-wired for remote on/off switchPre-slotted mounting plateInstruction manualFree 1 year tech support1 Year Warranty Parts and Labor.