Copied Kukko 3-Arm, Revers Quick Adj. 6.5-Ton Capacity, 5-1/8"(130mm) Open, 3-7/8"(100mm) Reach
Kukko 3-Arm, Revers Quick Adj. 6.5-Ton Capacity, 5-1/8"(130mm) Open, 3-7/8"(100mm) Reach
For removing bearings, gears, discs, etc. A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench. Can be installed on various pulling hooks and variable reach thanks to jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Hydraulic spindle series 8-0 for particularly tight parts, available from a particular puller size. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported. Standard pulling hook with quick adjusting capability quick adjust. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip). Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. The pulling hooks sliding parts must always sit stably and fully on the cross-beam. If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time. The pulling hooks support surfaces must always be straight and sit fully beneath the part to be removed. Do not use any electrical or pneumatic servo screwdrivers or hammer drills. Protective blanket required. Protective goggles required. Space Below 3/8 " Spread Used Internal 2 3/4 - 7 1/8 " Hexagon Drive (Male) (Metric) 17mm Maximum Load (Metric) 6t Space Below (Metric) 10mm Maximum Torque (Metric) 80Nm Spread Used Internal (Metric) 70 - 180mm Spread (Metric) 27 - 130mm Depth (Metric) 100mm Space Next To It (Metric) 31mm Space Next To It 1 1/4 ".
Price Comparison
| Seller | Contact Seller | List Price | On Sale | Shipping | Best Promo | Final Price | Volume Discount | Financing | Availability | Seller's Page |
|---|---|---|---|---|---|---|---|---|---|---|
|
BEST PRICE 1 Product Purchase
|
|
$251.50 | $251.50 |
|
$251.50 | See Site | In stock | Visit Store |
Reviews
Questions & Answers
Iron Age Groundbreaker Pull-On Boots, Composite Toe, Size 12W, 11"H, Brown
$169.95
AJC Bombardier Mach Z Adrena 995CC Snowmobile Replacement Battery 2005-2007, B , 12V
$83.95
Buyers Twin Series Clamp For Tubing, Tsct075, 3/4" Id - Min Qty 8
$44.44
Standard Eye Adjustable Manual Trolley 4000 Lb. Capacity
$235.95
Little Giant 1-EAYS Centrifugal Parts Washer Pump - 115V- 170GPH at
$134.20
PIX , Standard Timing Belt, XL, 3/8 X 35-3/16, T176, Trapezoidal
$7.50
NEMA Enclosed Motor Starter, 16A, 1PH, Remote Start Terminals, Start/Stop, 100-250V, 13-16A
$335.95
Double Inlet Blower Wheel, 5-3/4" Dia., CW, 3450 RPM, 1/2" Bore, 8"W, Aluminum
$109.95
L.H.Dottie Hex Nut, Solid Brass, 1/4"-20, 100 Pack
$35.95
Generic Parts Service Load Wheel Assembly w/ Bearings For Crown PE 4000 Pallet Trucks, Dual Poly
$51.95
Ingersoll Rand R7.5i-TAS-115, 10HP, Rotary Screw Comp, Gal, Horiz., 115 PSI, 36.7 CFM, 3PH 230V
$15,009.00
JET Bevel Gear
$9.00
Wesco Dock Door Seal Heavy Duty w/ Wear Pleats 8'W x 10'H 20" Projection - Black
$1,449.00
Caster Wheel Assembly For Hyster B60ZAC with S/N B230N01799E Pallet Trucks
$43.95
AIGNEP Ball Valve , 3/8" Tube X 3/8" Male Nptf - Min Qty 7
$16.25
TRITAN Sprocket , Pitch, 2-7/16" Finished Bore, 30 Teeth
$209.95
Replacement Vac Motor - Pd For Ametek 115216
$99.95
Thermodisc Steam Trap TD6524 NPT 1/2"
$459.95
Global Industrial Paramount 1-Tier 1 Door Locker, 12"W x 12"D x 66"H, Gray, Assembled
$229.95
Lista 40-1/4"W Cabinet, 11 Drawer, 162 Compart - Bright Blue, Keyed Alike
$4,699.00
Buyers Products 2-1/2" I.D. Forged 4-Bolt Welded Mount Drawbar
$88.95
JET JTM-949EVS with Newall DP700 DRO & X Powerfeed
$21,499.00
GENIE Blue Adhering Mat, Pack of 1
$139.95
Fairbanks Lever Dolly E-72-RT - 6'L Handle - Mold-On Rubber Wheels - 4250 Lb. Cap
$319.95
SSI Schaefer Plastic Stacking Bin, Hopper Front, 19-3/4"L x 18-1/8"W x 12"H, Blue
$64,950.00
Petersen Rigid Plastic Liner - Round Gallon Receptacles
$92.95
Allpoints 461887 Temperature Control
$78.95
HSS Import Taper Pin Reamer, Straight Flute, # 6
$26.95
Metric One-Piece Clamping Collar, 28mm, Black Oxide Steel
$11.75
Tennsco 3 Level, Bulk Storage Rack, Wood Deck, Add On, 52-3/16"W x 36-1/4"D x 84"H, Medium Gray
$449.95
Bondhus 5/32" Hex T-Handle Length - Pkg Qty 2
$15.60
OccuNomix Crew Sweatshirt Hi-Vis Yellow 4XL
$38.95
Axle For Crown RR 3000 Series Lift Pallet Trucks
$22.00
Nuvo 76/656, 1 Light-Landscape Flood, Antique Verdi, 2.75 W
$24.99
UHMW Polyethylene Plastic Rod - 3" Diameter x ft. Long
$31.95
Performance Tool 12 Ton Shorty Hydraulic Bottle Jack
$74.95
Baldor-Reliance Motor , 200HP, 1790RPM, 3PH, 60HZ, 447T, TEFC, FOOT
$32,499.00
Elasco Single Channel Drop Over, 3"W x 3"H, Yellow
$335.95
Global Industrial Lithium Iron Phosphate Battery, 691WH
$715.00
Big Bill Regular Jeans Indura Denim oz., 46W x 32L, Flame Resistant, Blue
$96.95
