Kukko Hydraulic High Performance Puller with 3 Jaws, 16.5 Ton Cap., 14-3/4" Opening, 7-7/8" Reach

Made in Germany, Grease hydraulic spindle power, Parallel design helps prevent kicking/slipping, Standard jaws with variable adjustments on the cross beam, Reversing the jaws enable puller to be used for external and internal extractions. The extra strong, 3-arm universal puller with grease-hydraulic spindle is used for pulling off heavy, particularly tight-fitting bearings, gears and discs in all common sizes for crafts, workshops and industry. The grease-hydraulic spindle is used for extraction operations with a tractive force beyond 10 t. The maximum average pulling force that can be achieved is 20 t. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. Equipped with robust and adjustable standard hooks, the solid construction of the puller ensures powerful, non-destructive dismantling for both external pulling and internal pulling. The 3-arm design guarantees even load distribution and thus a particularly secure hold on the part to be pulled off. Range of Application:For pulling off heavy, particularly tight-fitting bearings, gearwheels and pulleys Features: Screw connection allows easy loosening and particularly tight tightening of the trigger hooks with a hexagonal spannerHydraulic spindle guarantees easy and controlled removal of particularly stuck parts with little effort3-arm design ensures an even distribution of force and allows for greater pull-off forcesApplication also with eccentric components due to free-moving trigger hooks sliding on the crossheadVariable adjustment to any span between xx - xxx mmSafe positioning of the spindle due to rotatable spindle tip both on smooth surfaces and for centring (Switch Technology)Optionally convertible from an external extractor to an internal extractor by reversing the extractor hooksAnti-slip device on the spindle head for safe working with spannersSpindle run-out to protect the threadBenefits: Attach the puller hook to the part to be pulled off from the outsideSlide the claws under the partUse a spanner to fix the hooksPull the spindle manually to fix itMove the hexagon on the spindle head with a ratchet or a combination spanner until the component is releasedSpare Parts: 11-0-T_3-Arm Traverse3-200-S_Standard trigger hook (set)8-1-B_Long hydraulic spindleSpecifications: Clamping depth of external puller [mm]: 200 mmWidth across flats [mm]: 17 mmSpan outside pull-off (min.) [mm]: 105 mmSpan outside pull-off (max.) [mm]: 375 mmHook root thickness at the tip (claw thickness K) [mm]: 4 mmHook base width (claw width J) [mm]: 35 mmHook base depth usable (claw depth usable O) [mm]: 32-1/2 mmTotal hook root depth (total claw depth H) [mm]: 67 mmTotal claw thickness (L+1mm) [mm]: (claw distance to base surface): 20 mmSpan inside pull-out (min.) [mm]: 220 mmSpan inside pull-out (max.) [mm]: 500 mmMax. tractive force [t]: 15Max. tensile force [kN]: 150 kN.