OneUp EDC Lite Plastics Kit - No Tool - Red

Easy to install. Easy to carry. And compatible with pretty much any bike with a steerer tube. The included 9 function Multi Tool contains your most used tools and lives inside your stem/steerer tube. Product Specs Weight: 75g Colors: Black, Red, Blue, Green, Orange, Purple, Turquoise Functions: 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx , Flat Head Screwdriver What's in the Box EDC Multi-tool. EDC Lite Carrier EDC Tool clip Starnut setter bolt Headset preload bolt Easy Installation. All you need is a hammer, a 4mm hex and five minutes to install EDC Lite on your bike. The Tool You Need EDC Lite puts the most common tools you need in your hand, when and where you need them. The 9 function multi-tool includes 2, 2.5, 3, 4, 5, 6, 8mm hex, T25 torx and a flat head screwdriver. EDC LITE COMPATIBILITY ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT Incompatible forks: Giant Overdrive 2 Forks. RockShox 35 Series Forks. Cannondale Lefty Forks. Carbon Steerers STEERER TUBE INNER DIAMETER The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position. STEERER TUBE LENGTH Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox except Fox 38 = 190mm min Fox 38 = 210mm min RockShox Forks = 210mm min Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.