HABOTEST AC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity

Features:CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.Note:*MUST read the user manual carefully before use for safety.*Battery not included.Parameters: Range Resolution Accuracy AC Current (MAX current: 1000A, True RMS) Frequency range: 0.1~600A: 40Hz~400Hz 600~1000A: 40Hz~60Hz 60A 0.01A (2.5%reading+8) VFD:(5.0%reading+10) INRUSH:(5.0%reading+10) 600A 0.1A 1000A 1A DC Voltage Input impedance: 10M(LoZ: 300k) Overload protection: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V 600mV 0.1mV (0.5%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 1000V 1V (0.8%reading+5) AC Voltage Input impedance: 10M(LoZ: 300k) Overload protection: AC750V/DC1000V Maximum input voltage: AC750V/DC1000V Frequency range: 40Hz~1kHz, True RMS 600mV 0.1mV (0.8%reading+5) 6V 0.001V 60V 0.01V 600V 0.1V 750V 1V (1.0%reading+5) VFD(750V) 0.1V (2.0%reading+5) Resistance Overload protection: 250V 600 0.1 (1.0%reading+5) 6k 0.001k 60k 0.01k 600k 0.1k 6M 0.001M 60M 0.01M Diode It displays the approximate forward voltage value of the diode. Forward DC current is about 1.5mA; Overload protection: 250V Continuity approx. 30, the buzzer sounds and the LED light on Test Voltage Approx. 1V Overload protection: 250V Capacitance Overload protection: 250V 10nF 0.001nF (4.0%reading+5) 100nF 0.01nF 1000nF 0.1nF 10F 0.001F 100F 0.01F 1000F 0.1F 10mF 0.001mF 100mF 0.01mF (5.0%reading+10) Frequency/Duty Ratio Overload protection: 250V 10Hz 0.001Hz (1.0%reading+3) 100Hz 0.01Hz 1000Hz 0.1Hz 10kHz 0.001kHz 100kHz 0.01kHz 1000kHz 0.1kHz 10MHz 0.001MHz (3.0%reading+3) 1~99% 0.1% Temperature *The below precision does not inlcude the error of thermocouple probe. 1 3 (-20~0) 1.0% or2 (0~400) 2.0% (400~1000) H 1H 6H (-4H~32H) 1.0% or 4H (32H~752H) 2.0% (752H~1832H).