SHD-Series Coupler Hose Barb

Dixon, 4SHDS3, SHD-Series 1/2" Schrader Twist-Lock Interchange Coupler 3/8" Standard Hose BarbConstructionMachined components are manufactured using solid bar stockStainless steel toggle-pawls, retaining rings and springs maximize corrosion resistance and extend service lifeSteel componentry is plated using ROHS Compliant Trivalent ChromeAdapter components are constructed of brassSleeves are constructed of steelNitrile (Buna-N) seals standardCompatibility & Interchange DataSchrader Twist-Lock InterchangeParker Twist-Lock, Tomco Series-TL, Foster SHDSafety notesIt is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failureOperating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to applicationDixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.