Adapter Flareless Bite Fitting

Dixon, FLC2404-10-12, 5/8" Male Tube OD X 3/4" Male NPTF Steel Adapter Flareless Bite FittingApplicationsChemical, pulp and paper, oil and gas refineries, military, air compressors and machine toolsWell-suited for a variety of processing and general industry hydraulic applicationsUseIdeally suited for use with tubing having medium to extra heavy wall thicknesses.Fittings are suitable for sub-zero through elevated temperature applicationsSpecificationsExceeds Military (MIL F18866) and SAE J514 standardsFeatures3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting.Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality.InstallationCut, de-burr and clean tubingPre-set ferrule onto tubingInspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation.Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn.NoteTemperature rating is limited by the material chosenPressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed.