N DQC Bowes Plug Standard Hose Barb

Dixon, N4S4, N-Series 1/2' DQC Bowes Interchange Steel Plug Standard Hose Barb 1/2'SpecificationsRated pressure for connected Steel Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 11,000 PSI (755 bar) BurstConstructionMachined components are manufactured using solid bar stockPhosphor Bronze retaining ring and spring maximize corrosion resistance and extend service lifeSteel componentry is plated using ROHS Compliant Trivalent ChromeAvailable OptionsStaked ferrule option available, contact DixonCompatibility & Interchange DataBowes Interchange Bayonet StyleInterchangeable with Bowes 51000-Series, National Series 'B', Dixon Dixlock, MacDonald Quick-ActionSafety notesOperating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to applicationDixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including deathIt is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.