BR-Series 1/8" Brass Coupler .157" Hose Barb

ConstructionMachined components are manufactured using solid brass bar stockStainless steel balls, retaining rings and springs maximize corrosion resistance and extend service lifeMachined components are plated with chrome-over-nickel platingNitrile (Buna-N) seals are standardCompatibility & Interchange DataRectus 21KA, Tomco Series SC, CEJN Series 223Safety notesOperating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to applicationDixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including deathIt is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.