Coupler x Hose Shank Ferrule

Dixon, 200-C-BR, 2' Brass Female Coupler x Hose Shank - Crimped Ferrule CompatibleApplicationsDesigned for use with liquidsUseSuitable for use with King Crimp sleeves and ferrulesSpecificationsProduced to interchange with all product produced to Commercial Item Description A-A-59326DFeaturesPrecision machined to rigid tolerancesStainless pins will not rust or bind, providing great strength and safetyRecess holds gasket firmly in place - ensures proper placementLong shank design allows proper banding, thus eliminating the major cause of hose damageConstructionBuna-N gasketDurable stainless steel cam arm pinsSupplied with safety clipsHow it worksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.Safety notesUnder no circumstances should cam and groove couplings be used for compressed air or steam service!Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed.Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products.WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.