MiniFlex 300-10-2-10 HF Flexible Current Probe

The High Frequency MiniFlex® HF is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes.The High Frequency MiniFlex® HF, with a bandwidth frequency from 5Hz to 1MHz, is perfect to connect to any oscilloscope with BNC input to analyze complex-shaped current and transient present in electronic power supplies, welding stations, etc. It presents virtually no load to the system under test and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The MiniFlex® meets EN 61010 and is CE marked. It has an mV output proportional to the current measured for direct readings on DMM, data loggers or oscilloscopes,. TRMS measurements are taken when connected to a TRMS meter. The MiniFlex® is insensitive to DC currents and only the AC component of the measured signal is measured.Features:Measures from 0.5Arms to 300ArmsAccuracy 1% of Reading ± 0.3ATRMS measurements when connected to a TRMS instrumentNo core saturation or damage if overloaded9V battery for typical 140 hour continuous operation1MHz frequency responseLow phase shift for power measurementsInsensitive to DC, measures only AC component on DC + AC signalsExcellent linearityLightweightSensor is resistant to oils and aliphatic hydrocarbonsEN 61010; 1000V CAT III; 600V CAT IV; CE MarkApplications:Power measurementsMeasurements on thyristors and SCRsSwitching measurements (disconnecting switch, etc.)Measurements on switchgearControl signals.