2620 Leakage Current Probe

The Model 2620 measures leakage current shunted to ground caused by insulation faults. It enables the operator to locate failures when they occur, or anticipate them before they occur, without shutting down equipment or spending hours troubleshooting.It is designed specifically for locating low current faults on high current loads. The detector is a sensitive nickel alloy AC current transformer capable of measuring differential or leakage current as low as 500μA, and may be used to measure current up to 400A continuous duty.The Model 2620 provides two output ranges: 1mV/mAac or 1mV/Aac. The output leads are terminated with standard 4mm banana plugs capable of interfacing with any standard multimeter. With its 4' jaw opening and range of 500μA to 200A, the Model 2620 provides a versatile way to analyze unbalanced current measurements, leakage values on grounding conductors and ground loop currents.FeaturesVery high sensitivityDifferential or leakage current from 500μACurrent up to 400ATwo switch-selectable measurement ranges: 4AAC / 400AACLarge inside jaw diameter allows use on large or multiple conductorsWork with single-, dual- and three-phase networksConnect directly to DMMs on mV or Vac rangeApplications:Preventive maintenanceEquipment troubleshooting on electrical distribution systemsHigh accuracy low-current measurementsMeasure fault currents on three-phase, three-wire systemsIndustrial troubleshooting checks.