NC400-6 Electronic Counter 6-Digit 1/16 DIN

Applications:Packing, cutting, welding and pressing machines controlLength measuring and cutting,withparts count and production wrap-upFeatures:Counter: Single or double input, enabling progressive counting, regressive counting, progressive/regressive with external signal control, quadrature, sum/sum, sum/subtraction and subtraction/subtraction. Configurable scaling factor and decimal point position Batch counter: Counts the number of times that the counting input Preset 2 was reachedTotalizer: Counts the total of pulses in the counting input or the number of times that the batcher preset was reachedPresets (Set Points): 2 presets for the counter, 1 for the batch counter and 1 for the totalizerOutput 1: Relay output or voltage pulse associated to the counter preset 1. Timed triggering: usually configurable as open or closedOutput 2: Configurable relay output to trigger the counter preset 2, batch preset or totalizer preset. Timed triggering: usually configurable as open or closedReset: Manual through digital input or front keys. Multiple programmable automatic reset modesHold: Through digital input or front keys. The hold digital input will not working if 2 counting inputs are in useInput types: Voltage pulse, dry contact, NPN sensor or PNP sensorSensor power supply: 12V power supply for proximity sensorsProgrammable front key: Can be configured to interrupt counting (hold), reset counters or reset outputsHold countings: Replaceable internal battery for counters maintenance in case of a failure of main power supplyRS-485 digital communication, MODBUS RTU protocol, 9.600 baud rateEasy-to-use menuPassword protected parameters configurationIndelible 8-digit serial number that can be accessed from the displaySilicone keyboardNot necessary to dismount cables to access the circuitWeatherproof front panel (IP65)NC400-6 is an advanced 6-digit counter that also performs batch and totalizer counting operations. It has two outputs with independent and configurable presets that can be triggered based on counting, batch or totalization values. Its 2 outputs allow for an independent timed triggering.The counting inputs can be configured to connect drycontact, voltage pulse, NPN or PNP sensors. Sensors may be powered by an internal power supply.Counting mode can be configured as progressive, regressive, quadrature, sum or subtraction. Several reset modes - automatic or manual - can be configured. Manual reset can be generated by a digital input or key from the front panel.For more information, please see Data Sheet.