Temperature Converter, Loop-Powered, Isolated

PR electronics, 3331, Temperature converter, loop-powered, isolatedFeatures:Excellent accuracy, better than 0.05% of spanSlimline housing of 6 mmExcellent EMC performance and 50/60 Hz noise suppressionSelectable < 30 ms / 300 ms response timePre-calibrated temperature ranges selectable via DIP-switchesApplication:The 3331 temperature converter measures a standard Pt100, TC J and K temperature sensor, and provides an isolated passive analog current output signal.High 2 port isolation provides surge suppression and protects the control system from transients and noise.The 3331 can be mounted in the safe area or in Zone 2 / Division 2 areas.Approved for marine Application:s.Technical Characteristics:Flexibly loop powered by 5.5...35 VDC via connectors.< 30 ms fast response time with simultaneous sensor error detection when selected.Selectable 300 ms response time when signal dampening is needed.Selectable internal/external CJC.Excellent conversion accuracy in all ranges, better than 0.05% of span.Meeting the NAMUR NE21 recommendations, the 3331 provides top measurement performance in harsh EMC environments.The device meets the NAMUR NE43 standard defining out of range and sensor error output values.All terminals are protected against overvoltage and polarity error.High galvanic isolation of 2.5 kVAC.Excellent signal/noise ratio of > 60 dB.Mounting / installation / programmingSelectable DIP-settings for easy configuration of more than 1000 factory calibrated measurement ranges.The narrow 6 mm housing allows up to 165 units to be mounted per meter of DIN rail, without any air gap between units.Wide ambient temperature range of -25°C to +70°C.