Universal AC/DC Transmitter

4179, Universal trip amplifierFeatures:Measures AC current and voltage signalsOutputs passive or active current signalsProgramming, process monitoring and diagnostics via 4511 / 4501 (sold separartly)Response time < 0.75 s and excellent accuracy better than 0.3%Universally powered by 21.6…253 VAC / 19.2...300 VDCTechnical characteristics:The latest analog and digital techniques are used to obtain maximum accuracy and immunity to interference.Possibility of output safety feedback by selecting S4...20 mA output.The current output can drive up to 800 Ohms, with an adjustable response time of 0.0…60.0 seconds.Exceptional mA output load stability of <0.001% of span / 100 Ohm.Meets the NAMUR NE21 recommendations, ensuring high accuracy in harsh EMC environments.Meets the NAMUR NE43 recommendations, allowing the control system to easily detect an input error.Each unit is tested to a high 2.3 kVAC, 3-port galvanic isolation level.Excellent signal to noise ratio of > 60 dB.Application:The 0...5 AAC RMS range makes it possible to accurately measure a typical current transformer.The 0...300 VAC RMS range allows accurate supply voltage monitoring.The 4179 measures standard input ranges, and can be freely configured to customer-defined input range.Converts narrow AC current / voltage inputs to wide bipolar or unipolar outputs, e.g. 0...1 VAMS input = ±10 volt or 4...20 mA output with a minimum span of 0.5 AAC RMS or 0.5 VAC RMS.Configurable input limits control the output value for increased safety.Mounting / installation / programmingVery low power consumption means units can be mounted side by side without an air gap - even at 60°C ambient temperature.Configuration, monitoring, 2-point process calibration and more are accomplished using either the 4501 detachable display or the 4511 detachable digital communication enabler.All programming can be password-protected.NOTE: To program the item 4179 you'll need the p/n 4501 (sold separartly).