Temperature/mA Converter, Single

PR electronics, 9113BA, Temperature/mA converterFeaturesInput for RTD, TC and mAActive / passive mA output via the same two terminals1 or 2 channelsCan be supplied separately or installed on power rail, PR type 9400SIL 2-certified via Full AssessmentConfiguration and monitoring by way of detachable display front (PR 4511/4501); process calibration and signal simulation.Copying of the configuration from one device to others of the same type via the display front.TC inputs can use either the internal CJC or a terminal with a built-in Pt100 sensor (PR 5910Ex, channel 1 / PR 5913Ex, channel 2) for higher accuracy.Advanced monitoring of internal communication and stored data.SIL 2 functionality is optional and must be activated in a menu point.ApplicationThe device can be mounted in the safe area and in zone 2 / cl. 1 div. 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I/II/III, Div. 1, Gr. A-G.Conversion and scaling of temperature (Pt, Ni and TC) and active current signals.The 9113 has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.Characteristics1 green and 2 red front LEDs indicate operation status and malfunction.2.6 kVAC galvanic isolation between input, output and supply.MountingThe devices can be mounted vertically or horizontally without distance between neighbouring units.