Features:Concealed mounting bolts under the lock's cover, which cannot be removed without triggering the tamper detection monitorCompletely weatherproofIngress protection to IP67Aluminum lock body for excellent corrosion resistance.Built-in heater for continued functionality in colder climates, the YG80 can handle any environment it is placed inComplete monitoring capabilitiesProvides a range of output signals - bolt locked and unlocked position, door position, and tamper detectionIntegrated access control system capabilitiesSelectable fail safe / fail secure modes, three user selectable control methods, and multiple attempts to lock or unlock, ensures that the YG80 is ready for a wide range of application requirementsA symmetrical design means the YG80 can be installed both horizontally and vertically, in indoor and outdoor environmentsThe included three meter flying cable ensures easy connection for all the monitoring, control and the 12-24VDC power supplyDoor gap: 15 mm maximumStatic strength: 11,240 lbs. Dynamic strength: 148 ft-lbs.Endurance: 300,000 CyclesVoltage at lock: 12-24VDC +/- 15% Auto relock: Will attempt to lock or unlock 3 times if obstructed during operationInitial power up time: 25 seconds, only after power has been removed for an extended period.Current usageStandby Current: 50mA at12V; 40mA at24V; 1.6A at24V with heater onMaximum Current: 1.0A at12V; 0.5A at24V; 2.0A at24V with heater on.Monitor switch ratings: 24VDC, 0.25AEnvironment:IP 67 Rating - suitable for indoor and outdoor use.Cold, -35°C for 2 Hours EN 60068-2-1:2007Dry Heat, +70°C for 2 Hours EN 60068-2-2:2007Corrosion, 240 Hours Salt Spray EN 1670:2007, Grade 4Certifications and Listings:UL294, CSA22.2 No. 205 and UL1034FCC: Title 47, Part 15, Subparts A & B - Class B DeviceISED (IC): ICES-003 - Class B Device.