RangerONE Dual Resistance Monitor

Transforming Technologies, CM1601, RangerONE Dual Conductor Resistance Monitor, 1 OperatorCM1601 Dual Conductor Resistance Monitor is the most reliable workstation monitoring system that saves time by eliminating the time consuming testing of wrist straps and coil cords. This extremely sensitive monitor measures the electrical resistance of an ESD wrist band and work surface and signals if the devices fail. It features audible and visible alarms that are triggered if the operators resistance exceeds 35 meg ohm or if the surface exceeds 100 meg ohm. CM1601 Dual Conductor Resistance Monitor has an ESD-safe conductive case and uses special dual wire wrist band sets that contain two independent ground paths, which provide fail-safe protection. This resistance based monitoring system works with the WB2800, WB2695, WB5000, and WB7000 Series wrist bands. This monitor can monitor 1 person/wrist strap.Features:Most reliable workstation monitoring systemExtremely sensitive monitor accurately measure the electrical resistance of an ESD wrist band and work surface and signals if the devices failAudible and visible alarms are triggered if the operators resistance exceeds 35 meg ohm or if the surfaces exceeds 100 meg ohmSaves time by eliminating the time consuming testing of wrist straps and coil cordsUses special dual wire wrist band sets that contains two independent ground paths, which provide fail-safe protectionResistance based monitoringESD-Safe conductive caseWorks with WB2800, WB2695, WB5000, and WB7000 Series wrist bands.