AC Power Digital Timer with Internal Buttons

Features:Waterproof, corrosion-proof. This industrial timer was built for the plating industry to take acid fumes, caustic chemicals, washdown. IP65 enclosure makes this suitable for wet, production floors, industry, or outdoors.Backlit display.Set time with internal buttons.Loud buzzer on a timer.Relay controls other devices up to 15 A.Choice of N.O or N.C. relay output.Digital Process Timer is easy to program with only three push buttons. Counts down the cycle you set and then resets to the same time for the next cycle. When the cycle is completed, a very loud 103dB warbling buzzer sounds and the red beacon LED flashes.Many different operating modes are selectable with switches inside the box:Mode 1(default) counts down from the set time. Cycle can be cancelled by holding the start button. If time is set to zero then it counts up.Mode 2 like mode 1 but does not allow cancellation.Mode 3 is for triggering the time cycle mechanically with a contact close (like a proximity switch) that remains closed throughout the countdown.Mode 4 allows pausing and re-starting the cycle until the time accumulates to set value.Mode 5 stops automatically at the end of cycle.Mode 6 provides an early warning on the beacon LED.Mode 7 is a guard duty that requires the start button to pressed continually or else an alarm sounds (cycle repeats indefinitely).Mode 8 is especially for spray rinses in plating operations.Mode 9 is an machine run-time countdown.Mode 10 is an on-delay.Mode 11 is a repeat cycle.Mode 12 is an off-delay for the relay.