Moisture Meter BW and RH Thermo-Hygrometer

FeaturesMoisture Meter - Ligno-DuoTec BW:Pinless, dual-depth mode 1/4 " and 3/4" deepMicroprocessor-based circuitry assures calibration stability and accuracy for the life-time of the meter. The calibration is internally -checked and adjusted before each reading in pin and pinless modePinless mode allows lower readings in hard woods than pinRH Thermo-Hygrometer:Meter indicates RH, Temp, DPT, GPPThe number 134 on the screen is an individual probe number to give the customer an easy way to identify RH BluePeg Probes especially if several probes are in use for testing concrete. Probe numbers rotate through 001-999The meter has a HOLD function, to use when the display is not visible during measurements, and to use when scrolling through RH, T, GPP, DPT to obtain correlating sets of valuesRH BluePeg Probes:RH BluePeg Probes can be connected to the Ligno-DuoTec BW meter with Adapter H or with RH cableResponse time 8 secRH Adapter:The Adapter has 35mm stereo plugs (male) on both ends to connect Lignomat's RH BluePeg Probe directly to the Ligno-DuoTec BW.ApplicationsTo keep close tabs on moisture in wood and humidity in air during production, flooring installations, inspections and water damage repairs.Advantages:Measures wood in percent, quick and easy with dual-depth selection for 1/4" and 3/4" deep. Ideal for engineered products and a wide range of building materialsMeasures relative humidity and temperature, DPT and GPP using Lignomat's RH BluePeg probe. The precision RH BluePeg probe gives this thermo-hygrometer great accuracy and a short response time. The RH BluePeg Probe fits in Lignomat's sleeve for in-situ probe testing in concrete.