Digital Voltage Indicator

HDE, DVI-500/K01, Digital Voltage IndicatorIncludesDVI-500(1) HP-DVI-2(1) HP-DVI-6(1) IEP-DVI-5CS-DVI-5 CaseThe DVI-500 is designed to be used on both transmission and distribution systemsin overhead and underground applications. The DVI-500 indicates voltage from 0.1kV – 500kV and is auto-ranging with no range selector switch or settings required. Voltage is displayed on a large 1.45"LED display with a 3-digit readout. In addition, an audible alarm alerts the user to the presence of voltage above 100VAC. The DVI is auto shut-off and will turn off after 4 minutes of inactivity. Two overhead probes are supplied with the DVI-500 - a large 6"overhead hook probe for transmission system use (HP-DVI-6) and a smaller 2"overhead hook probe for distribution system use (HP-DVI-2). Simply attach the correct probe for the proper overhead application. Use of a hotstick is required for all overhead and underground applications. The DVI-500T can be used in underground applications to measure elbow test points using the underground probe (IEP-DVI-5).FeaturesFor use on system voltages up to 800kV (reads up to 500kV line-to-ground)No range select or switch or settings requiredLarge LED display indicates the line-to-ground voltage levelDisplay is easy to read in bright or dark conditionsVoltage readout allows the user to distinguish between nominal and induced voltagesAudible indication when voltage is detectedMeasure elbow test points with the DVI-500T and DVI-100TBuilt-in universal spline for standard hot stick attachmentBuilt-in self test to verify proper operationAuto shutoff with low battery functionPowered by a field replaceable 9V lithium or alkaline batteryCompact, rugged and lightweight polycarbonate housing.