Phase Flasher Cable Identifier

HDE, PF-50, Phase Flasher Cable Identifier, Includes Transmitter, Receiver and B-5 BagThe PF-50 Cable Identifier identifies the correct phases of de-energized and discharged overhead and underground cables. It consists of a transmitter and receiver that are designed to be hand held with or without gloves or with optional accessory hotsticks. Red LED's on both units indicate that the PF-50 units are connected to the same cable. Maximum cable length is 5,000 feet. Because of its higher test voltage, the PF-50 can test a mile of cable. The front panel on the transmitter and receiver units has a green LED for the battery indicator as well as 3 red LED'sto indicate that the units are attached to the same cable. Once the cable has been isolated, tested and grounded, connect the ground clips on each unit to a known system ground. After the transmitter and receiver have been turned on, touch the units to each end of the cable to be identified. The red LED's will illuminate to indicate that the PF-50 units are connected to the same cable.FeaturesHigher test voltage of 50VDC allows for longer cable lengths to be tested - up to 5,000 feetHand held units identify lengths of cableUse in overhead or underground systemsIdentify cables up to 5,000 feet in lengthCompact, lightweight and easy-to-useSuper bright LED indicatorsLarge copper alligator clips with heavy duty bootsLow battery indicatorPower edby field replaceable 9Vlithiumor alkaline battery in eachun it.