Field Mounted HART Temp Transmitter

PR electronics, 7501A3A1B12GY, Field Mounted HART Temperature Transmitter, Low Copper Aluminum, Optical Buttons, Display, -40 to 85 Degree Silicone Rubber, M20x1.5 6H, Eproxy + Polyurethane, Transmitter, Hazardous Area, GrayFeaturesRTD, TC, Ohm, and bipolar mV input and analog outputHART 7 functionality with HART 5 compatibilityHigh definition display0, 90, 180, & 270 degree position adjustments.Monitoring, programming and diagnostics view.Extensive diagnostics with flashing red or white back lightSupports 7 languagesLocal operator interface (LOI)3 optical buttons; up, down and enter.Dynamically adaptive to wear or accumulation of dirt.Immune to interference from ambient light sources.Useable with or without gloves.ConfigurationFrom the LOI through PR guided menu.PReset and HART modem.HHC, DCS or AMS via HART.Mounting / installationFor installation in zone 0, 1, 2 and zone 20, 21, 22 and in Class 1, Division 1 and 2 applications.Hardware assessed for use in SIL 2 applications.Mounting on 1.5"–2" pipe bracket or on wall / bulkhead.ApplicationLinearized temperature measurement with TC and RTD sensors e.g. Pt100 and Ni100.HART communication and 4...20 mA analog PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors.Conversion of linear resistance to a standard analog current signal, e.g from valves or Ohmic level sensors.Amplification of bipolar mV signals to standard 4...20 mA current signals.Up to 63 transmitters (HART 7) can be connected in a multidrop communication setup.