Kuriyama Fire Products FOREST LITE Single Jacket Fire Hose, 1-1/2" X 100 Ft, 300 PSI, White
Best Price:
Buy Kuriyama Fire Products FOREST LITE Single Jacket Fire Hose, 1-1/2" X 100 Ft, 300 PSI, White for $209.95 at @ Globalindustrial.com
No coupon is required — this is the standard retail price.
Set a price drop alert to never miss an offer.
Price Comparison
Seller | Contact Seller | List Price | On Sale | Shipping | Best Promo | Final Price | Volume Discount | Financing | Availability | Seller's Page |
---|---|---|---|---|---|---|---|---|---|---|
BEST PRICE 1 Product Purchase
|
|
$209.95 | $209.95 |
Flat Shipping ($39.99)
|
$209.95 | See Site | In stock | Visit Store |
Product Details
Armored Textiles N55H15F100N FOREST LITE Single Jacket Fire Hose, 1-1/2" X 100 Ft, 300 PSI, White Forest Lite is a single jacket, polyurethane-lined lightweight hose intended for use in wild land fire suppression. It meets or exceeds NFPA 1961 Fire Hose Standard, 2013 edition. Diameters: Forest Lite is available in 1" and 1.5" diameters. Jacket Construction: The jacket is virgin spun high tenacity polyester. The outer jacket is thoroughly impregnated with a polymer compound to provide superior resistance to chemicals, abrasion and ultraviolet light. Compound is heat set at 250 F. Lining: The thermoplastic lining shall be a single-ply extruded tube and shall be unaffected by ozone. The finished form shall be free of pits or other imperfections and shall have a smooth finish. No reclaimed material shall be used. The tensile strength of the liner shall not be less than 2000 psi, with an maximum elongation of 10 percent. Adhesion: The adhesion between the liner and the inside jacket is such that the rate of separation of a 1.5" wide strip cut transversely, shall not be greater than 1" per minute over a period of ten minutes, under a weight of 12 pounds. Accelerated Aging: Lining specimens subjected to an exposure of 158 F +/- 3.6 F, for a duration of 96 hours shall be conditioned to ASTM D 573, Standard Test Method for Rubber - Deterioration in an Air Oven. Then, the specimens shall be tested to ASTM D4112, Standard Test Methods for Vulanized Rubber and Thermoplastic Elastomers- Tension, Method A. Under evaluation, the tensile and elongation properties of the liner shall not be less than 75% of their initial values. Warranty: ATI warranties both the hose and couplings to be free from defects in material and workmanship for a period of 10 years. Upon evaluation, hose found to be defective will be repaired or replaced by ATI at no charge to the fire department.