Boss-Lock Cam & Groove Coupler

Dixon, RC075EZ-70, Boss-Lock 1-6/64" - 1-22/64" EZ Cam & Groove Swaged Type C Coupler with FerruleApplicationsDeveloped specifically for chemical transport hoses having Cross-linked Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes.SpecificationsProduced to interchange with all product produced to Commercial Item Description A-A-59326DFeaturesProvides a permanently attached cam and groove fitting when superior coupling retention is required.In testing tank transport hoses from a wide variety of manufacturers, the swaged Boss-Lock fitting proved itself to be the clear winner in overall performance.How it worksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.NoteSpecial equipment is required for installation,Safety notesUnder no circumstances should cam and groove couplings be used for compressed air or steam service!Dixon stems and ferrules are specifically designed to be used together as a coupling system.Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon productsUnder no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically designed for their use.Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed.