Dixon, 8VM8-B, V-Series 2.06' Brass DQC Snap-Tite Interchange Valved Male CouplerConstructionMachined components are manufactured using solid bar stockStainless steel balls, retaining rings and springs maximize corrosion resistance and extend service lifeSteel componentry is plated using ROHS Compliant Trivalent ChromeSteel coupler sleeves are hardened to resist deformation and maximize service lifeTubular 'TV' valves are constructed from steel bar stock and are designed for optimum performance in pneumatic applicationsNitrile (Buna-N) seals are standardAll couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damageValve seals are crimped in place to maintain integrity during excessive flow conditions and pressurized connectionAvailable OptionsContact Us for all available option addersStandard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and SiliconeKalrez® seal options include: 4079, 6375 and 7075Valve options include: Unvalved, tubular, steel, brass and 316 stainless steelSleeve options include: Sleeve-lock, Flanged and Silicone-flangedOxy-clean treatment is availableCompatibility & Interchange DataInterchangeable to MIL-C-51234Snap-Tite H/IH and Faster TNV/TNLNoteMinimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operationSafety notesWARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.