Bradley, 2921-S000CE, 2921, Sensor Hand Dryer, Surface-Mounted 220-240 volt, 5 amps, 50/60 hz - silver, corded, EuroplugProduct Materials:2921-W Cover: High impact ABS; White. Antimicrobial agent applied to inhibit the growth of mold, mildew and fungus.Adjustable Motor: thermally protected universal brush type motor operating at 35,000 RPM. High/Low setting options.Filter: HEPA filter with odor neutralizing tablet reduces contaminates in the air when hand drying.Sensor Operation: electronic infrared sensor. Automatic shut off after 20 seconds.Water Reservoir: collects water to prevent water from going on the floor.LED Display: LED's 1 through 4 flash green while dryer is in operation. LED 5 is solid green when dryer is in standby mode; solid blue when dryer is in operation. LED 6 is unlit during normal operation; flashing red when HEPA filter requires replacement. LED 7 is unlit during normal operation; solid blue when water collection tank needs emptying.Installation:Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated circuit and must be properly grounded. GFI Circuit protection is recommended. It is recommended that 1 of the 4 mounting anchors is fastened into a wall stud or support.Operation:Place hands into cavity of dryer. Slowly move hands up and down through air stream until dry. Dryer will stop after hands are removed from cavity.Guide:Surface-mounted ADA-compliant hand dryer shall have an antimicrobial, high impact ABS cover in white (2921-W) and silver (2921-S). Hand dryer shall have a High/Low adjustable setting motor. Motor shall have a power consumption of 1200 watts powered by a thermally-protected universal brush operating at 35,000 RPM. Dryer shall operate at 76 dB while delivering 85 CFM of air and 335 MPH velocity (29,480 LFM). 110-120 volt dryer shall have a consumption of 10 amps. 220-240 volt dryer shall have a consumption of 5 amps.Overall dimensions: 26-1/4'H x 13'W x 9-1/4'D (667mm x 330mm x 235mm)Weight: 19.5 lb (8.9 kg).