Male SAE Inverted Flare Swivel x Hose Barb
Male SAE Inverted Flare Swivel x Hose Barb
2900408CBC, 5/16" Tube OD x 1/4" Hose ID Male SAE Inverted Flare Swivel x Hose BarbBarb SpecificationsNumber of Barbs: 2Barb Length:.77"InstallationAssembly Instructions:1. Trim hose end with smooth square cut.2. Lubricate either push-on fitting, hose or both.3. Insert push-on fitting into hose until first barb is in hose.4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.Disassembly instructions:1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.NoteNo hose clamps or ferrules are neededSafety NotesDixon push-on fittings are intended for use with Lok-On (push-on style) hose only.Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap. ... Show More Show Less