CON_Z-1, Conformable Safety-Grip Tape Black/Yellow 60'Heskins conformable traction tape is perfect for applying onto an irregular surface such as diamond treads also known as checker plate or diamond plate.If you have an irregular surface, you need a product that can cope with the intricacies of this demanding application. Diamond tread can be a very dangerous surface; it is potentially lethal when wet, creating a greater risk of slips. The levels of grip can also be very low; this is measured in Coefficient of Friction or (COF). Applying conventional traction tape does not work successfully, since the peaks and valleys result in stretching of the plastic film. Thus when applied into the valleys it will want to revert to its original flat state, this will then result in the traction tape lifting off the surface and becoming useless. Heskins conformable traction tape has a completely different construction that was designed to work perfectly as diamond plate tape.When compared the conformable anti slip tape seems very similar to a conventional grip tape, but, instead of a plastic base use a soft aluminum foil base. This ensures the conformable traction tape conforms to the surface properly. As with all of tapes this must also be applied to a clean dry surface.The upper surface of conformable anti slip tape is an abrasive mineral coat; the minerals that apply ensure that the customer receives a product that provides Coefficient of Friction levels far in exceed any State or Federal requirement. Non slip flooring requirements are required on the MIL SPECS MIL-17951, MIL-5044 & MIL-PRF-24667, OSHA and Americans with Disabilities Act 2008.Features:For application on uneven surfaces such as durbar treadAluminum foil backing has no memory so conforms to surfacesReduces risk of anti-slip lifting from uneven surfaces.