SuperPro IS416 Includes Only:4 x ISP CablesSoftware CDAC AdapterUSB CableSD Card for stand-alone operationFeatures with all optional accessories:High-speed ISP production programmer with industrial grade quality. The ultimate choice for integrating ISP sub-systems.Supports almost all serial chips which include, but not limited, SPI, I2C, JTAG, BDM, UART, MON, SCI, SWD, SBW, C2D, ICC, SWIM, SDQ, DBG, ICE, CSI, LINSupported manufactures include, but not limited, ABOV, Ali, Altera, Atmel, Catalyst, Cypress, Freescale, Fujitsu, Haier, Hitachi, Hynix, Infineon, IR, ISSI, Lattice, Macronix, Maxim, Microchip, Micron, NEC, Numonyx, NXP, ON, Panasonic, Renesas, Rohm, Samsung, Sanyo, Silicon, Labs, Spansion, SST, ST, Teridian, TI, Toshiba, Winbond, Xilinx, ZilogPrograms up to 16 serial chips or 4 parallel NAND, NOR, eMMC chips simultaneouslySupport ISP serial programming to multiple chips of different models or types in one unitGeneral control ports supply signal isolation, relay isolation, power supply control, click detection, LED expansion display and other control signalsHigh-speed programming with adjustable speed meets board load requirement or ISP cable lengthThree modes: 1) Online mode. Connected to local PC by USB2.0(high speed) 2) Off-line mode. Using the stand-alone keyboard, LCD display, and mobile memory (standard SD cards), SuperPro IS03 can run independently off-line for flexible production and field setup. Project file size is only limited by the SD card memory size.3) Network mode. Connected to local network, control locally or remotely.Advanced pin-driver technology supplies cleaner signals, wider voltage range and accurate / higher clock frequency. Precise time generators ensure devices with 1.2V-5.0V Vcc higher speed and qualified product ratioChip safety security mechanism: the built-in precise voltage self-calibration circuit ensures the voltage is within the preset range at any time. The self-diagnosis function continuously detects hardware fault to ensure the machine run normally.Over-current, over-voltage and ESD protection avoids damaging the programmersUser operation interfaceLog document and production statistics function facilitates quality-trackingCopyright Protection with SD encryption, document right management and encryption, output limitation and remote controlApplications:Most suitable for PCB panel programmingATE, FCT, ICT, Test Fixture integrationCore of ISP stationGeneral ISP gang programming for volume productionTool used for firmware in-system updateField service and repairing tool for electronic equipment such as automotive and air conditioners.Superpro IS416 is a universal ISP Gang programmer which supports devices with almost all serial protocols. Programs up to 16 serial devices simultaneously. Up to 4 parallel devices like eMMC, NAND, NOR FLASH can be programmed in system simultaneously. USB2.0 or network remote and stand-alone operation modes.