Core Products, TRC-4995, 4.5" Apex Cervical Orthosis GentleMany activities in modern daily living place the head in a detrimental forward head posture. The Apex Cervical Orthosis™ is an inexpensive and convenient tool to assist the healthcare professional in restoring a patient's proper cervical posture. The Apex Cervical Orthosis™ counters the negative forces caused by forward posture, and works to gently reverse kyphotic attitude when used daily under the supervision of a spinal professional.FeaturesGentle version of our Apex Cervical Orthosis TRC-4996Adjustable to 3 heightsAssists restoration of proper cervical postureHelps decrease pressure on cervical soft tissueCounteracts forward head postureHelps in recovery from acceleration/deceleration injuriesPatent PendingThis product must be used under the supervision of your health care professional. To prevent hyperextension, fit the device to the patient by removing one or both lower portions of the device. To remove, slide a sharp blade along the inside edge of the precut areas.Place patient in supine position on a firm surface. Locate the Apex Cervical Orthosis™ in the area of lordotic loss. The larger angled surface should face the patient's shoulders. To adjust to the height, carefully remove sections by completing cut along the scored lines. The Apex Cervical Orthosis™ should be used daily, with increasing time intervals. The Apex Cervical Orthosis™ should be used for an initial treatment of 2 minutes. Increase each daily treatment in 1 minute intervals, with a maximum treatment time of 20 minutes.Train patient to roll off of the Apex Cervical Orthosis™ before sitting up post treatment. Some soreness or stiffness is normal, and our cold therapy CorPak™ should be applied to the affected area for 15 minutes after each treatment.