Tempo Communications, NC-500, 52024556 NETcat Pro2 Wiring TesterNC-500 Includes Only:Netcat Pro 2 Main Unit with StylusRemovable Remote Jack And Patch Lead Test And Id UnitTwisted-Pair (Modular Rj45), Coax (F) And Alligator ClipTest CordsFeatures:CAT 5 and CAT 6 cabling (shielded and unshielded) and coaxial cables can be tested.Pair tracing tones can be generated and applied to various combinations of wires to aid detection.If connected to a LAN cable with active equipment at the other end, the available speeds of service are identified and displayed from 10M, 100M, or 1G, half or full duplex. While testing the cable, NETcat also checks for the presence of power-over-Ethernet (PoE).Test and troubleshoot telephone, data, and coax wiringDetect split pairs, short circuits, broken, and crossed wiresStep TDR technology shows length to open or short of all pairsLarge icons ensure easy use with your finger tooBacklit touch-screen used to control all functionsIncluded stylus slots into main unitTone generator with four selectable precision frequency tones, compatible with Tempo Communications advanced digital signal processing probesIdentifies active network devices on 10/100/1000 Base-T Ethernet (802.3) networks both half and full duplex.Identifies PoE (source device detection).Memo Pad/reminder feature: stored in non-volatile memory.Field replaceable "F" type connector.Graphical touch screen display with contrast adjustment and backlight.Tests shielded twisted pair (STP), unshielded twisted pair (UTP), and coaxial cables.0-2,000 foot (600 Meter) cable length via step TDR.Sub-nanosecond resolution ensures this cable verifier is one of the most precise on the market, spotting errors that simple low speed wire-mappers miss.Patch cable and remote jack wire-map and identification using the self-contained "Office-ID/Remote" unit that neatly stores in the bottom of the main unit.Detects shorts, opens, reversed, crossed, and split pairs.Office identification using remote ID units - up to 8 different IDs, one included, seven additional available in NC-510 accessory kit.Troubleshoots and verifies a wide range of networks.Generate four distinct, precision tones for tracing low-loss cables like Cat 5.Operates on a single 9V battery (Not Included), with low battery indicator.Compatible with Tempo Communications precision digital probes.The NETcat® Pro2 is a digital cable and service verification tool for fast, accurate checking of cables, wiring, and network service. Operated using a back-lit touch screen display, the Pro not only tests wiring continuity and proper pair allocation, but measures the length of multi-pair cables, LAN, or coaxial cables by utilizing advanced high-speed Step TDR (time domain reflectometry). Additionally, the NETcat® Pro determines if network service is available up to Gigabit and displays whether Power over Ethernet is provisioned. One Touch Testing Verifies Network. Cabling and Service./.