Features:One Minute Setup for 24 Input RangesSwitch Selectable Relay ConfigurationAdjustable Setpoint and DeadbandInput LoopTracker® and Alarm Status LEDsHot Swappable Plug In DesignAlarm Test / Reset ButtonBuilt-In Loop Power Supply for Sink/Source InputApplications:Process Limit Backup AlarmTank Level Alarm Process Signal Over, Under, Out-of-Range AlarmThe API 1080 G accept a DC voltage or current input and provide visual alarm indication and alarm relay contact outputs. Voltage and current input ranges can be field-configured via external rotary and slide switches. Offset ranges such as 1-5 VDC and 4-20 mADC are also included. Heavy-duty relay contacts allow the module to directly control high capacity loads. Top-accessible potentiometers are used to adjust the alarm setpoint from 0 to 100% and the deadband from 1 to 100%.The API 1080 G provides a single setpoint adjustment of the two DPST relay contacts. The alarm output can be field configured for HI or LO operation, latching or non-latching, and normal or reverse acting. The deadband and alarm setpoint are adjustable.Sink/Source Input and Loop Supply For maximum versatility, a current input can be selectively wired for sinking or sourcing. This allows the API 1080 G to work with powered or unpowered mA inputs. An unregulated 18 VDC loop excitation supply can be used to power passive input devices eliminating the need for an additional DC loop supply.LoopTracker and Alarm Status LEDs API exclusive features include a LoopTracker LED that varies in intensity with changes in the process input signal. A red/ green bi-color alarm status LED visually indicate alarm status. These LEDs provide a quick visual status of your process at all times.Output Test / UnlatchAPI's exclusive functional test button can be used to verify the alarm and system operation. The output test button greatly aids in saving time during initial startup and/or troubleshooting. The HT latching option provides the additional function of unlatching the alarm when the reset button is pressed. The alarm will reset if the alarm condition not longer exists.