Monarch Instrument, 5396-1103, Track-It Extreme Temperature Logger, 4" Probe with NIST CertificateIncludes:Data LoggerBatteryUSB Interface CableTrack-It Download SoftwareFeatures:Up to 30,000 samples per record Alarm set points allows graphical visualization of excursionsCompact size allows for easy placement in any application21 CFR Part 11 compliant software9 point N.I.S.T. certificate-58 to 302 deg. F (-50 to 150 deg. C) temp rangeExtended range for probe tip: -70 to 300 deg. C0.1 deg. C accuracy and excellent repeatabilityAccurate internal clock (1 minute / year)MKT calculation over an entire data file or selected time intervalsFlexible and fixed probesSimple setup and deploymentRTD technology provides superior accuracy over wide temperature rangLogger requires USB Reader for PCTypical Uses:ValidationMedical Device SterilizationSteam Heat SterilizationAutoclave SterilizationOvens / ChambersRefrigerators / FreezersHACCP ImplementationPasteurizationFood and Beverage ProcessingUniformity MappingPharmaceutical ProcessingStorageThe Track-It Extreme Temperature Data Loggers are battery powered stand alone data loggers that record up to 30,000 samples of temperature data. The units are easily configured using the included Track-It Software. Simply plug the logger into the Extreme Logger Reader (required additional item) which connects via a standard USB cable to any open USB port on your PC and the Track-It Software automatically identifies the logger. The Logger communicates via the Extreme Logger Reader without opening the logger so long term integrity of the housing is ensured. The Track-It Extreme Temperature Logger housing is made of 316L Stainless Steel and meets IP68 rating standards. Set the unit up to start or stop recording immediately, at a predetermined time and date or only at certain temperature values. The sample storage rate can be set from 1 sample every 2 seconds up to 1 sample every 24 hours. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery.