Guardian, AP275-100, Electric Alarm Unit for Safety Stations with Amber Light & HornIncludes:Weatherproof Amber Globe with Protective GridWeatherproof Alarm Horn5' (1524 mm) Flexible Cord3 Prong Cord Connection PointWeatherproof Junction BoxWeatherproof Flow Switch (125 VAC, 5 amp Max, Single Pole, Double Throw)1-1/4" NPT Female InletMounting Bracket120 VAC, 0.8 Amp (Based On 75 Watt Bulb Supplied) Incoming Power Supplied By Others (Connection Size: 3/4" NPT)(2) 1/4"-20 U-Bolts For 1-1/4" Ips PipeFeatures:Installation: Unit is designed for use with combination safety stations, and can be mounted on either the vertical pipe of the station or on a wall adjacent to the unit. 120 volt, 0.3 amp electrical supply is required.Visual Signal: 14 watt, 1060 lumen LED light with weatherproof, shatter-resistant amber lens and protective metal grid.Audible Signal: Weatherproof horn delivers distinctive, urgent signal. Volume is preset at 100 db at 10 feet. An adjustment screw on the front of horn allows adjustment of output sound level.Flow Switch: 1-1/4" IPS single pole, double throw waterproof flow switch for installation in water supply line to emergency unit. Switch senses flow of water when either the eyewash or shower is activated. Flow switch must be installed with tee fitting in horizontal position, flow switch body in vertical position and at least 6" from closest fitting. Direction of flow is marked on switch body.Quality Assurance: Unit is fully assembled, wired and factory tested prior to shipment.Application:Alarm units serve two important functions when installed in conjunction with emergency eyewash and shower equipment. First, alarms serve to alert facility personnel that an accident has occurred and that assistance to the user may be required. Second, alarms deter unintended or malicious operation of the emergency equipment. For this reason, they are advisable in schools and other areas where the possibility of vandalism is present. Alarms are activated by a flow switch that senses the movement of water in the supply line when the safety unit is activated. Once activated, the bright light turns on and the horn sounds loudly.Notes:Flow Switch is Designed to Activate at 2.4 Gpm & Deactivate at 2.0 Gpm.Flow Switch Must Be Installed Vertically in a Horizontal Pipe Run, Upstream of Unit & at Least 6" From Fitting.Sound Output on Horn is Adjustable From 0 Db to 100 Db at 10 Feet.