TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability. Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input. 120 V 60 Hz output. 16 NEMA 5-15/20R outlet connector. 1U horizontal rack mount form factor. Package includes PDU with attached L5-20P input power cord, detachable C19 to NEMA L5-20P 12 ft/3. 6m secondary input cord, two NEMA L5-20R to NEMA 5-20P plug adapters, installable 1U mounting brackets, user manual with warranty information. Visual meter reports output power consumption in amps. ATS features provide redundant power for critical network equipment with a single input power cord. Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface. Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported. 2-7 millisecond transfer time between primary and secondary inputs. Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle. ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system. On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized. Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices. DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols. Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint. 12. 2 lbs. 1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D). 2 years limited warranty. TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.